In Win is taking over PAX East 2016 by launching two new cases, D-FRAME 2.0 and 303. Each case is super stylish and uses high quality materials that In Win is known for. Tempered glass, plenty of internal space, creative designs, and shiny finishes make these two products works of art and not just computer cases.
In Win D-FRAME 2.0
D-FRAME 2.0 embraces the spirit of an off-road motorcycle by using a handcrafted metallic tubing structure, and an open design that is capped with tempered glass on each side. It is a full tower that supports graphics cards up to 415mm (without water or air cooling), 360mm radiator on top, along with 90mm on front, and 65mm on bottom (front and bottom measurements include fans). There is also a USB 3.1 Type-C connector, 3 x USB 3.0, and HD audio on the front.
D-FRAME 2.0 is expected to launch Q3 2016 for $1,000 without PSU, or $1,500 with PSU.
D-FRAME 2.0 Specs
- Motherboard Support: 12″ x 13″ E-ATX, ATX, Micro-ATX
- Drive Bays: 4 x 2.5″ or 3.5″ Multifunctional Brackets
- I/O Expansion: PCI-E Slot x 8
- I/O Port: USB 3.1 (Type-C, 19-pin Connector) x 1, USB 3.0 x 3, HD Audio
- Dimensions (WxHxD): 726 x 264 x 548 mm (28.6″ x 10.4″ x 21.6″)
- Air Cooling:
- 2 x 120mm Fan Brackets (Supports 2 x 120mm fans)
- 1 x 3-in-1 Fan Bracket (Supports 3 x 120mm fans)
- Water Cooling:
- Top: 360mm radiator
- Front: 90mm maximum height including fan
- Bottom: 65mm maximum height including fan
- CPU Heatsink: Up to 165mm
- Case size: Full Tower
- Material: Reinforced Steel Tube, Aluminum, Tempered Glass
In Win 303
303 is mid-tower case that will be available in black and white, and each color has a tempered glass side panel with a glowing front panel. In Win has left plenty of space for high-end internals, video cards can be 350mm long and 164mm high, radiators can be 360mm x 70mm on top and 120mm for the rear. If you’re not into water cooling, 303 will support a heatsink up to 160mm, 3 120mm fans on top and bottom, and 1 120mm fan on rear. Lastly 303 can support a PSU up to 200mm, and room for 2 x 3.5″ drives, plus 2 x 2.5″ drives.
303 will be available June 2016 for $80.
303 Specs
- Motherboard Support: 12″ x 10.5″ ATX, Micro-ATX, Mini-ITX
- Drive Bays: 2 x 3.5″, 2 x 2.5″ (Max up to 3 pcs)
- I/O Expansion: PCI-E Slot x 7, Graphics cards up to 350mm length, 164mm height
- I/O Port: 2 x USB 3.0, 2 x USB 2.0, HD Audio
- Dimensions (WxHxD): 215 x 500 x 480 mm (8.4″ x 19.6″ x 18.8″)
- Air Cooling:
- Top: 3 x 120mm fans
- Rear: 1 x 120mm fan
- Bottom: 3 x 120mm fans
- Water Cooling:
- Top: 360mm radiator (Height: 70mm max)
- Rear: 120mm radiator
- CPU Heatsink: Up to 160mm
- Case size: Mid-Tower
- Material: Tempered Glass, SECC
